Using slider bar controls
Slider bar controls provide a graphical representation
of numeric data and enables you to quickly change
setting values.
Item
Descrip-
tion
Non—Touch
operation Touch operation
1
Current
value
N/A N/A
2
Slider
control
Use the Rotary
control to adjust
value
Slide the slider Up
or Down to adjust
value.
3 Auto
Press OK button
to switch between
Auto and manual
adjustment.
Select to switch
between Auto
and manual
adjustment.
Using control dialogs
Control dialogs enable you to control externally
connected equipment, such as an autopilot unit.
The following diagram shows the main features of
a typical control dialog:
Screen item Description
1
Status — provides status information for the
connected equipment. For example, the Pilot
Control dialog displays the locked heading
and current navigation mode for a connected
autopilot unit.
2
Control icons — provide direct control of
the connected equipment. For example, the
Pilot Control dialog Standby and Track icons
enable you to instruct a connected autopilot
unit to perform specic functions.
3
Close — Closes the control dialog.
3.11 Splitscreen controls
When viewing a page with more than 1 application
displayed you can switch applications from the
splitscreen view to fullscreen view.
Example 1 — Splitscreen page
Example 2 — Sonar application expanded to
Fullscreen
Switching the active pane or display
using the keypad
The Switch Active button is used to switch the active
pane on a multi application page and / or to switch
the active display.
With multiple displays connected and / or multiple
application page(s) displayed:
Cycle sequence
1. Press the Switch Active button to enter switch
mode.
2. Use the Rotary control to cycle through the
available panes and / or displays.
The keypad will cycle through displays in the
order in which they were paired. On multi
application pages the Range buttons can be used
Getting started
45
To Next Page
Loading...