FLIR RAYMARINE A75 WiFi - Renaming a Datapage; Deleting a Datapage; Setting up an Instrument Page (Example)

3. Select a blank cell on the new page.
4. Select Select Data Category.
5. Browse to the required data category.
6. Select the data item you want to display.
7. Repeat steps 3 to 6 for all data cells.
8. Select Rename Page.
9. Enter the new name for the datapage.
10.Select SAVE.
Renaming a datapage
From the Customize menu: Menu > Customize.
1. Select Edit Page.
2. Select Rename Page.
The onscreen keyboard is displayed.
3. Enter the new name for the datapage.
4. Select SAVE.
Deleting a datapage
You can delete custom or pre-congured datapages.
There must always be at least 1 datapage.
With the datapage you want to delete displayed:
From the Customize menu: Menu > Customize.
1. Select Delete Page.
A conrmation pop-up is displayed.
2. Select Yes to delete the datapage, or No to keep
the datapage.
Note: The pre-congured engine page layout
is unique and cannot be recreated in a custom
datapage.
Setting up an instrument page
(Example)
You can use the Data application to set-up instrument
data pages. The instructions below are provide as
an example of how you would set up an Instrument
data page for a DST800 transducer.
Ensure the relevant transducers are connected and
available on your system.
Tip Check that the relevant devices (e.g. smart
transducer, iTC-5 or Instrument display appears
in the list of Devices shown under the Diagnostics
menu.
With the Data application displayed:
1. Select Create new page from the Customize
menu: (Menu > Customize).
2. Select the required Layout (e.g. 3 Cells).
A new blank page is displayed with the rst cell
highlighted.
3. Select the Select Data Category option from
the menu.
4. Select Depth.
5. Select the Depth data item.
6. Select the next empty cell on the page.
7. Select Speed.
8. Select Speed.
9. Select the speed graphic you want to use.
10.Select the next empty cell on the page.
11. Select Back to view the list of Data types.
12.Select Environment.
13.Select Water Temp.
14.Select the Water Temperature graphic you want
to use.
15.Use the Back button to return to the Edit Page
menu.
16.Select Rename Page.
The onscreen keyboard is displayed.
17.Enter the name for your new data page and
select SAVE.
18.Exit the Menu.
278