FLIR RAYMARINE A75 WiFi - VRM;EBL Context Menu

Item Description
1.
Cursor
2.
Bearing and range from your
vessel to the cursor position
You can also display the cursor position in the
databar, from the homescreen select: Customize
> Databar Set-up > Edit Databar, now select the
data box where you want the cursor position to be
displayed. Select Navigation > Cursor Position.
Measuring using VRM/EBL
Variable Range Markers (VRM)
A Variable Range Marker (VRM) is a circle centred
on your vessel’s position and xed with respect to
the heading mode. When this circle is adjusted to
align with a target, its range from your vessel is
measured and displayed on the Radar context menu
when you select the VRM with the cursor.
Electronic Bearing Lines (EBL)
An Electronic Bearing Line (EBL) is a line drawn
from your vessel to the edge of the window. When
this line is rotated to align with a target, its bearing
relative to your vessel’s heading is measured and
displayed on the Radar context menu when you
select the VRM with the cursor.
The VRM/EBL are combined to measure both the
range and the bearing of the specied target.
Item Description
1 VRM
2 Target
3 EBL
4 Range and bearing
Measuring using oating VRM/EBL
You can use the VRM/EBL oat function to measure
the range and bearing between any two points on the
Radar screen. This function allows you to move the
VRM/EBL centre away from your vessel’s position
and onto a target. You can then change the radius
of the VRM to determine the distance between two
points and change the angle of the EBL, relative to
its new origin, to obtain the bearing.
Item Description
1 Range and bearing
2 Target 1
3 Target 2
VRM/EBL context menu
The VRM/EBL function includes a context menu
which provides positional data and menu items.
The context menu provides positional data of the
VRM/EBL in relation to your vessel:
• Range
• Bearing
The context menu also provide the following menu
items:
• Float Centre
• Adjust
• VRM/EBL Off
Accessing the context menu
1. Non-touchscreen and HybridTouch displays:
i. Move the cursor over the area or object and
pressing the OK button.
2. HybridTouch and Touch only displays:
i. Select and hold on an area or object, or
ii. With the Chart Call-out displayed select the
Call-out box.
Radar application
259