18.2 Changing the camera feed
Changing the camera / video feed
On touchscreen displays, if more than 1 feed is
available you can change which feed is displayed by
swiping the screen.
From the Camera application.
1. Touch and swipe your nger up to move to the
next video feed.
2. Touch and swipe your nger down to display the
previous video feed.
Changing the camera / video feed
On HybridTouch and non-touch displays, if more
than 1 feed is available you can change which feed
is displayed on the screen using the Directional
controls.
From the Camera application
1. Move the Directional control Down to display
the next video feed.
2. Move the Directional control UP to display the
previous video feed.
Changing the camera / video feed
using the menu
When more than 1 feed is available, you can change
which feed is displayed onscreen using the menu.
From the Camera application:
1. Select Menu.
2. Select Camera View.
3. Select Camera:.
4. Select the feed you want to display.
18.3 Switching video stream
When connected to a compatible camera, such as
the AX8 thermal camera, which broadcasts more
than 1 video stream simultaneously, you can choose
which stream to display.
From the Camera application with the desired
camera’s feed displayed:
1. Select Menu.
2. Select Image Mode:
A list of available streams is displayed e.g.:
• Thermal MSX
• Thermal
• Visible
3. Select the stream that you want displayed on
your MFD.
Camera application
291
To Next Page
Loading...