FLIR RAYMARINE A75 WiFi - Overlays and Chart Vectors

14.16 Overlays
Various overlays are available to aid navigation and increase situational awareness.
Note: The table below identies the overlays supported by each cartography vendor. However, the
overlay may not be supported by all levels of cartography supplied by that vendor. Please check with
your cartography vendor for supported features.
Overlay Description LightHouse Navionics
®
C-MAP
®
AIS Switch AIS targets on or off. This feature requires
additional hardware and is not available in 3D view.
Radar
Switches the Radar overlay on or off. This option
requires additional hardware and is not available in
3D view.
Aerial
Provides an aerial / satellite image overlay with
transparency setting.
Aerial Overlay: When Aerial is switched on, this feature determines
the coverage of the aerial overlay.
Relief Shading Overlays shading to indicate the depth and altitude
of terrain
NOWRad Provides the NOWRad weather overlay. This
option requires additional hardware and a service
subscription. This overlay is not available in 3D view.
Databoxes
Choose whether databoxes are displayed onscreen
and select which data is displayed.
ActiveCaptain VAD Enables ActiveCaptain community sourced content
on compatible C-Map cartography.
Chart Grid Determines whether lines of longitude and latitude
are displayed. This overlay is not available in 3D
view.
2D Shading
Determines whether terrain shading is displayed in
2D view.
Community Edits
Determines whether the community layer is enabled
or disabled.
Chart Text Determines whether chart text is displayed (place
names and so on).
Chart Boundaries
Determines whether a line indicating the chart
boundary is displayed.
Range Rings
View range rings in the Chart application. This
overlay is not available in 3D view.
Fuel Range Ring
View the fuel range ring. This overlay is not available
in 3D view.
Boat Size Determines the size of the boat icon.
Waypoint Name Determines whether the Waypoint names are
displayed next to waypoints.
Route Width
Determines the width of route lines. This overlay is
not available in 3D view.
Track Width
Determines the width of track lines. This overlay is
not available in 3D view.
Enabling AIS in the Chart application
To enable the AIS overlay in the Chart application
follow the steps below.
To enable the AIS overlay your system must include
an AIS receiver or transceiver. The AIS overlay is
not available in 3D view.
From the Chart application menu:
1. Select Presentation.
2. Select Overlays.
Chart application
185