18.6 Naming camera / video feeds
To help distinguish between camera feeds each feed
can be named.
From the Camera application:
1. Select the feed you want to name so that it is
displayed on the screen.
2. Select Menu.
3. Select Adjust.
4. Select Edit Name.
The onscreen keyboard is displayed.
5. Enter the name you want the feed to be called.
6. Select SAVE to save the new name for the feed.
The name of the feed is displayed in the camera
application’s status bar.
18.7 Adjusting the video image
If supported by your connected camera / video input
device or networked IP camera, you can adjust the
image settings.
With a video feed displayed in the Camera
application:
1. Select Menu.
2. Select Adjust.
3. Select Contrast, Brightness, or Color, as
appropriate.
The numeric adjust control is displayed.
4. Adjust the level to the required setting.
294
To Next Page
Loading...