• Silver
• Gold
• Gold+
• Platinum
• Platinum+
• Fish'N Chip
• Hotmaps
Navionics Free Trial chart cards are also supported
by your multifunction display.
To check the current availability of Navionics chart
cards and types, please visit
www.navionics.com or
www.navionics.it.
Note: Refer to the Raymarine website
(
www.raymarine.com) for the latest list of
supported cartography.
C-MAP charts
Your display is supplied with world base maps and
depending on purchasing options a C-MAP
®
chart
card. You may also purchase extra C-MAP
®
chart
cards to get enhanced chart details and additional
chart features.
Your display is compatible with the following C-MAP
®
chart cards:
• C-MAP Essentials
• C-MAP 4D MAX
• C-MAP 4D MAX+
Refer to the Raymarine website (
www.rayma-
rine.com
) for the latest list of supported chart cards.
To check the current availability of C-MAP
®
chart
cards and types, please visit:
lightmarine.c-map.com.
14.3 Chart selection
When a Chart application instance is opened for
the rst time, any chart cards inserted into the card
reader will be detected and the cartography stored
on the card will be displayed.
Where multiple chart types are present, the order of
precedence will be: LightHouse Charts rst, then
Navionics, and then C-Map. You can switch between
cartography types at any time using the Chart
selection page. The selected cartography applies to
the active instance of the Chart application and will
persist over a power cycle.
Selecting a cartography type
You can select the cartography type you want to
display in the Chart application.
Ensure you have inserted the chart card that
contains the cartography type you want to display.
From the Chart application menu:
1. Select Presentation.
2. Select Chart Selection.
A list of available cartography is displayed.
3. Select the cartography type you want to display
The Chart window is re-drawn to show the select
cartography type.
Chart application
167
To Next Page
Loading...