FLIR RAYMARINE A75 WiFi - Media Player Connection; Enabling Bluetooth

23.1 Media player connection
You can use your MFD to control a Bluetooth media
player (such as a smartphone).
The media player must be compatible with the
Bluetooth 2.1+ EDR power class 1.5 (supported
prole: AVRCP 1.0) or higher.
1. MFD
2. Bluetooth connection
3. Bluetooth media player
To use this feature you must rst:
• Enable Bluetooth in the System Settings on the
MFD.
• Enable Bluetooth on the media player device.
• Pair the media player device with the MFD.
• Enable Audio Control in the System Settings on
the MFD.
• Connect an RCU-3 remote and assign the shortcut
key to Start/Stop audio playback (Only required on
MFD that do not have a touchscreen).
Note: If your media player does not include built-in
speakers it may be necessary to connect the media
player's audio output to an external audio system
or a pair of headphones. For more information
refer to the instructions that accompany the media
player device.
23.2 Enabling Bluetooth
From the Bluetooth menu: (Homescreen > Set-up >
Wireless Connections > Bluetooth)
1. Select Bluetooth: so that On is selected.
344