FLIR RAYMARINE A75 WiFi - Resetting Your System

4.3 Screenshots
You can take a screenshot of what is currently
displayed on the screen.
Screenshots are saved in .png (Portable Network
Graphic) format to a MicroSD Card. The saved
images can be viewed from any device capable of
viewing .png images.
Taking a screenshot
You can take a screenshot by following the steps
below.
1. Insert a MicroSD card with suitable free space
into the card reader.
2. Press the Power button.
The Shortcuts page is displayed:
3. Select the Camera icon.
A conrmation message is displayed.
4. Select OK.
The screenshot is now saved to the MicroSD
card.
Tip If your display has a Back button you can also
take a screenshot by pressing and holding the Back
button until the conrmation message appears.
Selecting the SD card slot for
screenshots
If your multifunction display has 2 card reader
slots, you must select which card slot to save the
screenshot to.
From the homescreen.
1. Select Customize.
2. Select Display Preferences.
3. Select Screenshot File:.
4. Select either MicroSD 1 or MicroSD 2.
Viewing an image on the MFD
You can use your MFD to view images such as
screenshots.
1. Ensure you have the memory card, containing
the image you want to view, inserted into a card
reader slot.
2. From the Homescreen, select My Data.
3. Select My Files.
The le browser is displayed.
4. Use the le browser to locate the le.
5. Select the le you want to view.
The le will now open.
6. Select Back or Close to close the image.
4.4 Resetting your system
Your system may be reset to its factory default
settings if required.
There are 2 types of reset operation, both of which
affect the current display you are using, AND any
networked displays.
• Settings reset.
• Settings and data reset.
Settings reset
This option resets your setup menus, page sets, and
databar settings to factory default. It will NOT affect
your waypoints, routes, or tracks data.
Settings and data reset
In addition to the settings reset detailed above,
performing a settings and data reset will also remove
ALL waypoints, routes, and tracks data.
Resetting system settings
With the homescreen displayed:
1. Select Set-up.
2. Select Maintenance.
3. Select System Settings Reset.
A message is displayed prompting you to conrm
the action.
4. Select Yes to proceed with the settings reset, or
No to cancel.
Resetting system settings and data
Note: Performing a settings and data reset erases
ALL waypoints, routes, and track data from your
system. BEFORE proceeding with a settings and
data reset, ensure that you backup any data that
you want to keep on to a memory card.
With the homescreen displayed:
1. Select Set-up.
2. Select Maintenance.
3. Select System Settings and Data Reset.
A message is displayed prompting you to conrm
the action.
4. Select Yes to proceed with the settings and data
reset, or No to cancel.
66