Description Functions
1 Touch-
screen
you can touch the screen to operate
many common functions, including all
menu operations.
2 Home Press to return to the Homescreen.
3 Menu Accesses menus. Press again to close
menus.
4
UniControl
Provides rotary and joystick control.
5
Ok Ok push button
6 Back Press to return to a previous menu or
dialog level.
7
WPT / MOB
• Press and release to access the
waypoint options. Press again to place
a waypoint.
• Press and hold to place a Man
Overboard (MOB) marker at your
current position.
8 Power
• Press once to switch the unit ON.
• Once powered on, press the Power
button again to adjust the brightness,
perform a screen capture, access
Powersave mode or access the power
controls for external devices.
• Press and hold to switch the unit OFF.
9
Card reader
slot
Open the card door to insert or remove
a MicroSD card. There are 2 card slots
(labelled 1 and 2), used for electronic
charts and archiving waypoint, route,
track and settings data.
10 Pilot • Press to disengage integrated
autopilot.
• Press and hold to activate Auto mode
on integrated autopilot.
11
Switch
Active Pane
• Press to switch the active pane in
splitscreen pages.
• Press and hold to expand the selected
pane to fullscreen.
eS Series UniController
1. Rotary — use to select menu items, move the
onscreen cursor, and adjust the range in the
Chart and Radar applications.
2. Directional control — use to move the cursor
position in applications, pan up, down, left
and right in the Chart, Weather and Sonar
applications or to cycle through datapages in the
Data application.
3. OK push button — push in to conrm a selection
or entry.
gS Series Controls
Getting started
33
To Next Page
Loading...