FLIR RAYMARINE A65 - Waypoints List

Placing a waypoint at your vessel's position
In addition to positional information, a waypoint
placed at the vessel position will capture temperature
and sounded depth information (if you have the
appropriate sensors connected to your system).
From the Chart, Radar or Sonar application:
1. Select WPT.
The waypoint menu is displayed.
2. Select WPT again or select Place Waypoint At
Vessel from the menu.
The Waypoint Saved dialog is displayed.
3. Select the Symbol eld to change the symbol
that will be used to display the waypoint in the
Chart or Radar application.
4. Select the Name eld to change the name of
the waypoint.
5. Select the Group eld to change the group that
the waypoint is assigned to.
6. Select OK to conrm the waypoint details.
Note: If there is no user interaction with
the Waypoint saved dialog for approximately 5
seconds then the waypoint is saved with the default
settings and the dialog is closed automatically.
Placing a waypoint at a known position (lat/lon)
You can place a waypoint at a specied location
using latitude and longitude coordinates:
1. Select WPT.
2. Select Place Waypoint At Lat/Lon.
The waypoint details dialog is displayed.
3. Select the Position eld.
4. Enter the Latitude/Longitude position.
For HybridTouch displays you can use the
Rotary control and Ok button to quickly enter
the required coordinates.
5. Select SAVE.
6. You can also edit the waypoint symbol, name and
group by selecting the relevant elds.
7. Select Close or Back to close the dialog.
Waypoints list
Waypoints are organized into groups. By default all
waypoints are placed in the “UNSORTED” group.
The Waypoints list is accessed from the menu:
Menu > My data > Waypoints.
New waypoint groups can be created and each
waypoint can be assigned to a waypoint group. For
example; you could create a waypoint group called
“Fishing” and place all of your waypoints where you
caught sh into that group.
Waypoint groups can be managed from the Waypoint
groups list.
1. Sort By: — Waypoint groups can be sorted by
name or by date by selecting the Sort By: eld.
2. Unsorted — By default new waypoints are
added to the UNSORTED waypoint group.
Selecting the group will display a list of all
waypoints that have not been assigned to a
specic group.
3. Search — You can search for waypoints using
keywords by selecting Search.
4. Import/Export — Waypoints can be exported to
or imported from a microSD card by selecting
144