FLIR Scout II 240 User Manual

431-0008-21-10 Rev. 100 March 2015 9
2 Getting Started
2–4 Scout II/LS-X/LS-XR/Ocean Scout End User Tool
The Scout II/LS-X/LS-XR/Ocean Scout end user tool is a graphical user interface (GUI) that is used
with the following FLIR handheld thermal imaging cameras:
• Scout II Series
• LS Series
•Ocean Scout
These cameras are similar in design and may be referred to generally as “Cayman” cameras.
The software allows a user to make minor
configuration changes to one of these
cameras. For example, a user can turn
camera sounds on or off, or change the
amount of time before the camera shuts
down automatically. The tool can also be
used to perform a camera firmware
upgrade if one becomes available in the
future.
To download the GUI, go to http://
www.flir.com/hunting-outdoor/display/
?id=53129, select the end user tool
under Software to download.
Select Configuration to read camera
setting and make changes to available
camera features.

FLIR Scout II 240 Specifications

General

Brand	FLIR
Model	Scout II 240
Category	Thermal cameras
Language	English