Need help?Do you have a question about the FLIR FC-Series S and is the answer not in the manual?
General| Brand | FLIR |
|---|---|
| Model | FC-Series S |
| Category | Thermal cameras |
| Language | English |
Safety warnings and operational cautions for handling and operating the camera.
Lists related documents providing further details on mechanical dimensions and mounting.
Describes general installation of the FC-Series camera for outdoor security applications.
Details analog/digital video outputs and power options (PoE+, conventional).
Lists available accessories for purchase, such as power supplies and mounts.
Lists standard components included in the FC-Series camera package.
Lists items the installer needs to supply for installation.
Discusses requirements for camera placement and cable routing.
Covers methods for mounting the camera, including rear cable access.
Instructions for mounting the camera using the concealed cable wall mount accessory.
Explains sunshield positioning based on installation needs.
Details how to remove the camera cover to access electrical connections.
Details various camera connection ports like Ethernet, power, analog video, and GPIO.
Consideration for cable lengths and routing before installing components.
Instructions for enabling or disabling the supplemental lens heater using a jumper.
Guidance on performing initial tests of camera operation before final installation.
Details on using BNC and RCA connectors for analog video output.
Instructions for connecting conventional AC or DC power supplies to the camera.
Steps for connecting the camera via Ethernet for IP video and power.
Explains input and output signal connections via the accessory connector J8.
Ensures proper grounding of the camera to prevent permanent damage.
Describes proper installation of cable glands for watertight sealing and strain relief.
Instructions for mounting the camera using the concealed cable wall mount accessory.
Provides detailed technical specifications for the FC-Series cameras.
Describes the camera as an IP camera compliant with ONVIF Profile S, detailing its server functions.
Explains necessary IP communication parameter changes for network connectivity.
Outlines general steps for testing and configuring the camera for IP communications.
Guidance on performing initial tests of camera operation and connectivity before final installation.
Specific steps for verifying network connectivity to the camera via its IP address.
Instructions for accessing the camera's web interface using different user accounts.
Explains the live video display and controls available through the web interface.
Introduces FSM software for camera control and video streaming, and how to run it.
Detailed steps on launching and navigating the FLIR Sensors Manager software.
Covers fundamental configuration tasks like setting IP address and hostname.
Overview of configuration options including GEO settings, IR camera settings, and Video Analytics.
Access to LAN settings, services, and security options for server configuration.
Explains the principles of thermal imaging and how it differs from daylight cameras.
Provides solutions for common issues like image freezing, no video, or communication problems.
Guides users on how to configure a Windows PC's IP address for network communication with the camera.
Overview of configuration options including GEO settings, IR camera settings, and Video Analytics.
Details on adjusting thermal image parameters like AGC, ROI, and Scene Presets for optimal display.
Covers setting up motion detection areas, defining detection parameters, and configuring analytics.
Guide for FC-Series R cameras on creating measurement spots/boxes and setting temperature alarms.
Access to advanced settings including sensor, communications, networking, and VMS remote configurations.
Describes file management actions like firmware updates, backup, restore, upload, and download.
Procedure for resetting the camera to its original factory default configuration.
To Next Page
