427-0073-12-12 Version 120 May 2015 2-12
2
Basic Operation and Configuration
Services Menu
Date and Time: The Date and Time settings page is used to configure the date and time settings.
The date, time, and time zone can be obtained from an NTP server, or can be entered manually. If
NTP mode is selected, the NTP server information can be entered. The Nexus server must be
stopped before changes can be saved. After saving changes, it is necessary to restart the server to
make them effective.
If the Custom mode is selected, a pop-up window allows the information to be entered manually.
Set the date and time parameters, then select the Save button at the bottom of the page.
Toggle Server (Stop/Start)
To Next Page
Loading...
