Need help?Do you have a question about the FLIR FC series and is the answer not in the manual?
General| Detector Type | Uncooled microbolometer |
|---|---|
| Weight | Varies by model (typically 200g to 500g) |
| Resolution | 320x240 |
| Temperature Measurement | Yes |
| Thermal Sensitivity/NETD | < 50 mK |
| Video Output | NTSC or PAL composite video |
| Frame Rate | 9 Hz |
Essential safety warnings and cautions for camera installation and operation.
General overview of camera installation, mounting, and connection options.
Details on various ways to connect the camera for video and power.
Instructions for mounting the camera for rear cable access.
Details on how to connect various cables and power sources.
Recommended steps for testing camera functionality before final installation.
Importance and procedure for grounding the camera properly.
Detailed technical specifications for the FC-Series cameras.
Procedures for bench testing the camera before installation.
Guide to setting the camera's IP address using FLIR DNA software.
Overview of the Live Video page interface and available controls.
Enhancing network security with 802.1X authentication.
Enabling secure, encrypted communication via TLS.
Setting new passwords for login accounts for system security.
Guidance for maintaining and troubleshooting common camera issues.
Main menu for GEO, Video, IR, and Analytics setup.
Configuring video streams, codecs, and resolution for quality.
Adjusting thermal image parameters for optimal viewing.
Configuring motion detection, regions, and analytics.
Accessing advanced configuration options via the Maintenance menu.
Procedures to restore the camera to its original factory default settings.
To Next Page
