427-0089-00-12 Version 160 March 2019 13
This document does not contain any export-controlled information.
Camera Installation
1.4 Camera Connections
Refer to Table 1-1 for a description of these camera connections.
1.4.1 Installing the microSD Card
The FC-Series camera has local storage (on the camera) flash memory to store images captured as
a result of an alarm action. However, these images are lost during a reboot or power cycle. When a
Table 1-1: FC-Series Camera Connections
Connection Purpose
1 BNC Analog video
2 3-pin Terminal Vac or Vdc power
3 microSD card
Local storage of image files up to 64 GB
(supplied by customer)
4 Ethernet PoE+ power, communications, IP video stream
5 6-pin terminal J5 General purpose I/O
6 Accessory inputs Reserved for future use
Figure 1-7: Camera Connections
To Next Page
Loading...
