To Next Page

To Previous Page

Handling the camera13

7. Carefully push the lens into position.

8. Rotate the lens 30° degrees clockwise.

13.12 Calibrating the compass

13.12.1 Procedure

Follow this procedure:

1. Push the joystick to display the menu system.

2. Use the joystick to go to

(Settings).

3. Push the joystick to display the Settings menu.

4. Select Device settings and push the joystick.

5. Select GPS & compass and push the joystick.

6. Select Compass. If the Compass check box is unchecked, push the joystick to ena-

ble the compass.

7. Select Calibrate compass and push the joystick. Follow the on-screen instructions.

Note You have to rotate the camera slowly.

13.13 Changing the viewfinder eyecup

CAUTION

Applicability: Cameras with a viewfinder.

Make sure that the beams from the intensive energy sources do not go into the viewfinder. The beams

can cause damage to the camera. This includes the devices that emit laser radiation, or the sun.

Note This item is dependent on the camera model.

#T559880; r. AK/36075/36075; en-US

FLIR T620 User Manual

Other manuals for FLIR T620