Operation
8
8.5 Viewing a saved image
8.5.1 General
When you save an image, the image file is stored on the memory card. To display the im-
age again, open it from the image archive.
8.5.2 Procedure
Follow this procedure:
1. To open the image archive, do one of the following:
• Push the
button for 4 seconds.
• Push the
button to open the Settings menu. Select the icon and push the
button. Select the icon and push the button.
2. Use the
buttons to scroll through the saved images.
3. To close the image archive, push the
button.
8.6 Deleting all images
8.6.1 General
You can delete all image files from the memory card.
Note You can also delete one or more images when the camera is connected to a com-
puter via a USB cable. The memory card then functions as an external storage drive.
8.6.2 Procedure
Follow this procedure:
1. Push the
button to display the Settings menu.
2. Select the
icon and push the button.
3. Select the
icon and push the button.
4. Do one of the following:
• Select the
icon by pushing the button to delete all images.
Note This will reformat and delete all data from the memory card.
• Select the
icon by pushing the button to cancel the delete action.
5. The
icon is displayed for about 20 seconds while the card is being reformatted.
6. Push the
button to exit the Settings menu.
8.7 Changing the settings
8.7.1 General
You can change a variety of settings in the camera. You do this on the Settings menu.
#T559974; r.33562/33594; en-US
16
To Next Page
Loading...
