FLIR TG167 - Laser Pointer; Temperature Unit

Operation
8
• 0.95
• 0.80
• 0.60
• 0.30
• custom (0.01–0.99)
Note If you are unsure about the emissivity value, it is recommended to set it to 0.95.
8.7.3.2 Procedure
Follow this procedure:
1. Push the
button to display the Settings menu.
2. Use the
buttons to go to the icon.
3. Push the
button. This displays a submenu.
4. Use the
buttons to go to the desired option.
5. With one of the preset options selected, do the following:
5.1. Push the
button to save the setting and return to the Settings menu.
6. With the custom option
selected, do the following:
6.1. Push the
button to activate the custom field.
6.2. Use the
buttons to adjust the emissivity factor.
6.3. Push the
button to inactivate the custom field.
6.4. Push the
button to return to the Settings menu.
7. Push the
button to exit the Settings menu.
8.7.4 Laser pointer
8.7.4.1 General
The laser pointers are used as targeting pointers when measuring the temperature.
Available options for the laser pointer setting:
•
ON
•
OFF
8.7.4.2 Procedure
Follow this procedure:
1. Push the
button to display the Settings menu.
2. Use the
buttons to go to the icon.
3. Push the
button to toggle through the options.
4. Push the
button to exit the Settings menu.
8.7.5 Temperature unit
8.7.5.1 General
Available options for the temperature unit setting:
• °C (Celsius)
#T559974; r.33562/33594; en-US
18