FLIR TG267 Quick Start

Figure 4 Laser Safety Label
Figure 5 Type-K Thermocouple
EN-US English
QUICK STEPS
1. Register to activate the 2–10 year warranty extension (see Fig-
ure 3, QR Code, in the Illustrations section).
2. Long press the Power button to switch ON or OFF.
3. Scan a test area using the default MSX® image mode (thermal
plus visible image).
4. Use cross-hairs and laser for targeting. The laser’s circular tar-
get identifies test spots. See temperature reading on the display.
5. To use visible image mode only, see Image Adjustments menu.
6. Slide the high temperature lever (TG297) to the right to measure
> 400℃ (752℉).
7. Pull the trigger to capture images.
CAMERA PARTS
See Figure 1, Camera Parts, in the Illustrations section.
1. Display area
2. Return button (back up in the menu system)
3. Laser pointer button
4. Up/Down & Power (long press)/Menu (short press) buttons
5. Lanyard post
6. Accessory mount
7. High temperature lever (TG297) for use > 400℃ (752℉)
8. Lepton® IR camera
9. Laser pointer
10. USB-C and Type-K (TG267) jack compartment
11. Spot thermal sensor
12. Flashlight (LED)
13. 2M pixel visible spectrum digital camera
14. Image capture and menu exit trigger
#NAS100021; r. AD/64725/64725; mul
2

FLIR TG267 Specifications

General

Temperature Range	-25°C to 380°C (-13°F to 716°F)
Field of View	57° × 44°
Battery Life	Up to 5 hours
Thermal Sensitivity/NETD	< 70 mK
Image Frequency	9 Hz
Focus	Focus free
MSX (Multi-Spectral Dynamic Imaging)	Yes
On-Screen Emissivity Correction	Yes
Image File Format	JPEG
Laser Pointer	Yes
Drop Test	2 m (6.5 ft)
Weight	0.394 kg (0.87 lb)
Dimensions	210 × 64 × 81 mm (8.3 × 2.5 × 3.2 in)
Operating Temperature Range	-10°C to 45°C (14°F to 113°F)
Storage Temperature Range	-40°C to 70°C (-40°F to 158°F)
IP Rating	IP54
IR Resolution	160 × 120 pixels
Battery Type	Rechargeable Li-ion battery
Emissivity	Adjustable from 0.1 to 1.0
Image Modes	Thermal, MSX
Storage Media	Internal memory
Spectral Range	8–14 µm