Programming Menu System
6
• DEVICE SETTINGS
1. Bluetooth® (TG267 and TG297 only): Press MENU to switch Bluetooth®
ON or OFF. See Section 7, Bluetooth® Communication and FLIR Tools™,
for details.
2. Laser: Press MENU to enable/disable the Laser pointer. When enabled,
you can use the Laser pointer button to switch ON the Laser pointer. Use
the Laser pointer for accurate targeting of measurement spots.
3. Screen brightness: Use the arrows to select the desired display intensity
(LOW, MEDIUM, or HIGH).
#NAS100014; r. AJ/68076/68076; en-US
16
To Next Page
Loading...
