27
Download Flite App and update
The Flite App is available to download in the Apple App Store*.
We recommend using Flite App to ensure your board and controller
always have the latest software to deliver the best performance.
*An Android version is in development and will be available from the
Play store when ready. If you do not have an iPhone you may get your
software updates at one of our Service Centres around the world visit
fliteboard.com/locations
Open the app and agree to the onscreen prompts. You’ll be taken
to the first update process one step at a time. Follow the instructions
carefully to update 1. Fliteboard, 2. eFoil and then finally follow
instructions to turn on and update the 3. Flite Controller.
The Fliteboard update typically takes 2 – 3 minutes, eFoil update
2 – 3 minutes and Flite Controller 2 minutes.
You may need to wait 10 – 20 seconds for Fliteboard to restart between
Fliteboard and eFoil updates. The Fliteboard LED may switch between
flashing blue, solid purple or green.
Watch our Flite APP
update video
tinyurl.com/yb3vudw8
Download Flite APP
from App Store
iOS only, V10.7 or higher
apps.apple.com/
au/app/fliteboard/
id1499441319
Performing first update
BEFORE YOU USE FLITE APP FOR THE FIRST TIME MAKE SURE THE
PHONE, FLITECELL, FLITE CONTROLLER HAVE AT LEAST 20% CHARGE.
KEEP THE PHONE CLOSE AND IN LINE OF SIGHT WITH A STRONG
WIFI/CELLULAR NETWORK. DON’T USE THE PHONE FOR ANYTHING
ELSE SUCH AS CALLS, TEXTS, OR OTHER APPS.
FLITEBOARD IS READY FOR ITS FIRST UPDATE BY ENSURING THAT
IT IS ASSEMBLED AND POWERED ON.
MAKE SURE THE FLITEBOARD LID REMAINS CLOSED DURING THE
UPDATE PROCESS.
ENSURE FLITE CONTROLLER IS TURNED OFF AS THE APP CAN ONLY
CONNECT TO ONE DEVICE AT A TIME.
To Next Page
Loading...