FLO-DYNAMICS TSD450 - Page 15

Flo-Dynamics
®
TSD450™ III. Operating Instructions
Operations Manual
Printed in the U.S.A. for Flo-Dynamics ®
15
If needed, while running, press
the Red Button once to pause
the exchange.
Press the Green Button to
resume from pause.
Press the Red Button a
second time to cancel the
exchange.
When checking the fluid
level:
Press + or – to add or remove
fluid in 2/10 of a quart
increments.
Use Option 3 in the main menu
to add a full quart, and Option
4 to remove a full quart.
If the exchange stops and the
display reads “Halted –
Reverse Hoses”, push or pull
the knob on the flow diverter
valve to switch directions, and
press the Green Button to
resume the exchange.
If the exchange stops and the
display reads “Halted – Shift to
Neutral”, set the vehicle’s
parking brake, shift to neutral,
and press the Green Button to
resume the exchange.