FLO-DYNAMICS TSD450 - Page 14

III. Operating Instructions Flo-Dynamics
®
TSD450™
14
Printed in the U.S.A. for Flo-Dynamics ®
Operations Manual
Connect appropriate adapters
to vehicle’s cooler line fittings.
Connect the red and black
service hoses to the quick
disconnect adapters on the end
of the cooler line adapters.
Add Transmission Cleaner.
See “Adding Chemicals”
section.
Use the yellow ▲▼arrow keys
to select the desired amount to
be exchanged. Press the Green
Button to proceed.
When prompted, select a
cleaning mode to circulate
additives through the vehicle’s
transmission.
Press 3 for 10 Minute Cleaning
Start the vehicle’s engine when
the display prompts you to do
so. Then press the Green
Button to begin the exchange.
Once the exchange is finished,
the screen will beep and display
“Complete”.
Add Transmission Treatment.
See “Adding Chemicals”
section.
FUNCTIONS USED DURING AN EXCHANGE
Press 0 at any time to return to
the main menu.