6. Ensure the good positioning of the forks between the forklift lifting jig and the
FLO Ultra (identified by each of the arrows of B). Do a visual check to ensure
the right positioning of the forks and that the path of the forklift is clear.
7. Lift the FLO Ultra and transport it to the correct location. Avoid abrupt turns,
stops and starts during transportation.
8. Gently place the FLO Ultra at the correct location.
9. Re-use the lifting jig for other FLO Ultra installations or recycle it; however,
lifting equipment may only be used to lift a FLO Utra charging station. This
equipment must not be used for any other type of lifting.
12
To Next Page
Loading...