Flo Ultra - Forklift Lifting; Installing the Lifting Jig on the FLO Ultra

4.2. Forklift Lifting
NOTE: The Forklift Lifting section is only applicable when you are moving the FLO
Ultra with a forklift once the unit has been unpackaged. Refer to "Unloading the
Crate from the Truck" on page5 for more information.
NOTE: The lifting jig (ASME0586) is optional and sold separately from the FLO Ultra
charging station. Please refer to the FLO Ultra
TM
Ordering Guide available at flo.com.
Follow the instructions below to correctly lift a FLO Ultra with a forklift:

4.2.1. Installing the Lifting Jig on the FLO Ultra
Follow the steps below to install a lifting jig on the FLO Ultra:

8