Flo Ultra - Lifting the FLO Ultra with a Forklift

To Next Page

To Previous Page

4.2.2. Lifting the FLO Ultra with a Forklift

Follow the steps below to correctly and securely lift the FLO Ultra with a forklift:

Part Description

A Forklift lifting jig

B Fork position for lifting



1. Ensure that the operator is qualified and certified to operate the forklift.

2. Ensure that the lifting jig is properly installed and that all screws are correctly

tightened and secured before lifting, according to the previous section

Installing the Lifting Jig on the FLO Ultra

3. Confirm the lifting capacity of the forklift to make sure it can safely lift the

weight of the FLO Ultra. Only use a forklift that can safely lift the FLO Ultra. The

lifting capicity of the forklift must be over 700 kg (1 540 lbs) to lift the charging

station and the lifting jig. Refer to

Specifications

for more information.

4. Raise the forks to the height indicated by position B.

5. Secure the charging station to the forklift using a strap or chain. Use the long,

unpainted lifting bars to anchor the lifting jig to the charging station.