Flomasta 4718G - Set Program

Normal Time Setting Mode:
1. Press < >, the Day of Week (1-7) will flash, press
< >, < > to select the current Day of Week.
2. Press < >, the Hour will flash, press < >, < > to set
the Hour.
3. Press < >, the Minute will flash, press< >, < > to
set the Minute.
4. Press < > display will jump back to the step 1.
5. Press < > to confirm the settings and return to
Normal Mode.
(transmitter will auto-return to normal mode after 10
seconds.)
Factory Defined Programs:
The heater/cooler turns on according to the activated
program and the control temperature setting. When
the heater/cooler is On. Program number and /
icons are shown. The pre-defined programs are as
below:
7
Heater mode:
Mon ~ Fri Sat Sun
P1 06:00 (21°C) 08:00 (21°C) 08:00 (21
°
C)
P2 08:00 (16°C) 10:00 (16°C) 10:00 (16°C)
P3 12:00 (21°C) 12:00 (21°C) 12:00 (21°C)
P4 15:00 (16°C) 15:00 (16°C) 15:00 (16°C)
P5 18:00 (21°C) 18:00 (21°C) 18:00 (21°C)
P6 22:00 (16°C) 23:00 (16°C) 23:00 (16°C)
Cooler mode:
Mon ~ Fri Sat Sun
P1
06:00 (24°C) 08:00 (24°C) 08:00 (24°C)
P2
08:00 (29.5°C) 10:00 (29.5°C) 10:00 (29.5°C)
P3
12:00 (24°C) 12:00 (24°C) 12:00 (24°C)
P4
15:00 (29.5°C) 15:00 (29.5°C) 15:00 (29.5°C)
P5
18:00 (24°C) 18:00 (24°C) 18:00 (24°C)
P6
22:00 (29.5°C) 23:00 (29.5°C) 23:00 (29.5°C)
Set Program:
Press <PRG>, the hour will flash, press < >, < > to
8