PROGRAMMED MAINTENANCE
INTERVENTION DAILY WEEKLY TWO-MONTHLY SIX-MONTHLY
RECOVERY TANK CLEANING •
SUCTION FILTER CLEANING •
SOLUTION TANK FILTER CLEANING •
BRUSHES CLEANING •
BRUSHES DISASSEMBLY •
SQUEEGEE CLEANING •
FRONT SQUEEGEE RUBBER REPLACEMENT •
REAR SQUEEGEE RUBBER REPLACEMENT •
SPLASH GUARD RUBBER REPLACEMENT •
SQUEEGEE ADJUSTMENT CHECK •
SQUEEGEE HOSE CLEANING •
SOLUTION TANK CLEANING •
BRUSHES MOTOR CHECK •
SUCTION MOTOR CHECK •
BRUSHES BASE GROUP CHECK •
SCREW TIGHTENING •
RECOMMENDED BRUSHES
Brushes must be chosen depending on type of floor and dirt to be removed.
The employed material and the bristles diameter are the elements that distinguish different types of brushes.
MATERIAL CHARACTERISTICS
PPL (Polypropylene) Good wear resistance. Maintains characteristics with hot water up to 60°C. It is not hygroscopic.
NYLON
Excellent wear resistance, even with hot water over 60°C. It is hygroscopic. It looses its physical characteristics over the
TYNEX Nylon bristles with grains of abrasive material. Use with caution in order not to mark the floor or ruin the polishing.
BRISTLES THICKNESS
Thicker bristles are more rigid and must be used on smooth floor or floor with small joints.
On irregular floors with deep joints or relieves, it is recommended to use softer bristles which penetrate more easily and
deeper. Please be aware that when brushes bristles are worn out and therefore too small, they become rigid and unable
to penetrate and clean deeper. This may also happen with thicker bristles creating brush vibration.
PAD HOLDER
Pad holder is recommended to clean smooth surfaces. It has anchor points which permit the blocking of the abrasive pad
during work.
MACHINE CODE QUANTITY DESCRIPTION USE
ruby 45e 48901010 2 Brush PPL 0,3 Ø 235 Irregular floors with large joints.
Smooth floors with small joints and persistent dirt.
floors with small joints and persistent dirt.
Smooth floors with small joints and persistent dirt.
Floors of resistant material and particularly dirty.
s of 9”, for smooth surfaces cleaning.
ruby 55e 48901110 2 Brush PPL 0,3 Ø 285 Irregular floors with large joints.
Smooth floors with small joints and persistent dirt.
Smooth floors with small joints and persistent dirt.
Smooth floors with small joints and persistent dirt.
Floors of resistant material and particularly dirty.
Smooth floors with small joints and persistent dirt.
For pads of 11”, for smooth surfaces cleaning.
ruby 50e 48902010 1 Brush PPL 0,3 Ø 508 Irregular floors with large joints.
Smooth floors with small joints and persistent dirt.
Smooth floors with small joints and persistent dirt.
Floors of resistant material and particularly dirty.
For pads of 20”, for smooth surfaces cleaning
To Previous Page
Loading...