FLORA LJ3204P - Page 19

LJ3204P User Manual
19/26
Edit by Victor Xu
Copyright2011@ Shenzhen Runtianzhi Digital Equipment Co.,Ltd www.floradigital.com.cn
Priority The priority assigned to new jobs by default. Priority determines which jobs in a
given queue process first.
A High priority job might not always print first. This is because the software can
RIP a number of jobs simultaneously. If a smaller job finishes RIPing first, it will
move to the Send queue first, and immediately start printing.
Repeat Job Enter the number of times you would like the software to automatically re-send
the job.
This feature saves you from having to manually send the job each time you want
to output it.
Send After Check to specify what time the jobs in the queue will start to be output.
Comments Comments about the job that can be viewed through the Job Properties dialog.

ColorManagementTab
The Color Management tab displays the settings related to the
printing device. The layout of this tab may differ depending on the
output device.
Once you choose an ICC Profile, the rest of the fields in the Color
Correction group box fill in according to settings stored in the profile.
If you change any settings in the Color Correction group box, a
warning icon
appears next to the field to indicate that the current
settings are inconsistent with the settings in the profile.
Color
Correction
Select the desired type of color correction.
Use color
correction
Activates the color correction settings from the selected ICC
Profile.
Use only
linearization
Activates the linearization settings only from the selected ICC
Profile.
No color
correction
The software uses a generic CMYK profile, instead of a profile
generated from actual color measurements of output from the
device. Orange and green inks will not be used.
Output
profile
Select a profile from the list or select
Add
to add an ICC profile.
Media Select the media type the output is printed on. To add a new type of media, see
Profile Setup for more information.
Print mode Select the print quality for the output. This setting will vary for each type of printer.
Resolution
Select the output resolution. A higher
DPI
value improves the resolution of the job,
but slows down the output.
Color Mode Select the color mode that matches the inks set in the printer.
CMYK The image prints using a combination of cyan, magenta,
yellow and black inks.
CMY The image prints using cyan, magenta and yellow inks. All
black is CMY process black.
Grayscale The image prints using black ink only, producing a black and
white image with shades of gray.
CMYKLcLm CMYK plus Light Cyan and Light Magenta inks. This color
mode provides smoother
g
radations between li
g
hter shades of
colors.