Cleanfix
®
REVERSIBLE FANS
Cleanfix
®
Fans
INTRODUCTION
This manual is produced to assist in the installation,
operation and maintenance of the Cleanfix
®
Reversible
fan system.
IMPORTANT SAFETY INFORMATION
The safety information in this publication is to be used in
conjunction with the safety information supplied from the
original machine manufacturer. Please refer to all safety
information supplied, prior to doing any work on the Fan
Assembly or any other component(s) to assure total
safety.
Improper operation, maintenance or repair of this
product can be dangerous and could result in injury
or death.
Always use Cleanfix approved parts and components.
Failure to do so will result in voiding the 1-year parts
warranty for the fan.
Do not operate or perform any maintenance on this
product, until you have read and understood the
operation and maintenance information. Please
contact Flory Industries or their approved dealer for
any information that you may require.
The person(s) servicing the product may be
unfamiliar with many of the systems or components
on the product. This makes it important to use
caution when performing any type of service work.
A knowledge of the product and/or its components
is important before the removal or disassembly of
any component.
FAN SPECIFICATIONS
The following needs to be considered prior to the
installation of the Cleanfix
®
Reversible Fan system. If
your situation is listed in this section, do not install the
fan. Damage and/or injury may occur.
A. MOUNTING
Warning: This fan is not designed to be mounted onto
a crank shaft or crank shaft pulley. Torsional vibration
from crank shafts will damage the fan and could result in
machine damage and serious injury.
Cleanfix
®
Reversible Fan
Cooling Mode
Cleaning Mode
119
To Next Page
Loading...