W
ARNING
Failure to heed these warnings may result in personal injury or death!!
1. Before operating this machine, read the operators manual carefully.
2. Operator is to remain seated at all times while operating this machine.
3. Use eye, ear, and head protection to protect operator from any flying debris and noise.
4. Always shut off engine, allowing all movement to stop before leaving the operators position to adjust,
lubricate, or unclog the machine.
5. All personnel should be clear of machinery before starting or operating it.
6. Keep hands and loose clothing away from any power driven parts.
7. Do not operate this machine without all guards being in good condition and firmly in place.
8. Stop the operation of this machine when people or vehicle drivers vision becomes obscured, caused by the
discharge of materials or dust.
9. Before working on or underneath the sweeper, engage the parking brake and place blocks or safety stands
underneath each side of the sweeper to prevent accidental lowering of the machine. Allow all movement to
stop before beginning work.
10. Do not modify or alter this machine from its original intended use.
11. Be sure parking brake is engaged when sweeper is not in motion.
12. Never remove or bypass the neutral start safety switch in any manner.
13. Always start the engine from the operators’ position.
14. Never allow children to play on or around this equipment at any time.
15. Always use wheel chocks for added safety when transporting or servicing this machine.
16. Always display the SMV (Slow Moving Vehicle) sign when traveling on public roads. The law requires this
to be displayed when moving at speeds below 25 MPH. This sign is to be removed when the machine is
being transported on a trailer, if the sign is visible from behind.
17. It is recommended to also use the flashing caution lights when traveling on public roads.
M
ACHINE
S
AFETY
Additional precautionary statements: “ATTENTION” and “IMPORTANT” are followed by specific
instructions. These statements are intended for machine safety.
ATTENTION: The word “Attention” is used to warn the operator of potential machine damage if a certain
procedure is not followed.
IMPORTANT: The word “Important” is used to inform the reader of something they need to know to
prevent minor machine damage if a certain procedure is not followed.
100
To Next Page
Loading...