(picture 3) (picture 4)
Basic operation
1. Scan Function
When the radio is allowed to be scanned, which can be set by the software, you can press the PTT key to turn on or turn off the scan. When
the scan begins, indicators lights green, the radio will can scan automatically from channel 1 to 16 which is defined as scan added.
When there is signal in the scanning channel, it will stop in the channel for talk.
Note:
When there is signal in the scanning channel, it will stop in the channel for a talk and after several seconds.
Please note that scan is only available when there are two or more than two memory channels and two or more scan added channels.
EN-6
To Next Page
Loading...
