Need help?Do you have a question about the Flowserve Durametallic X-200 and is the answer not in the manual?
Follow plant safety regulations before equipment disassembly.
Specifications for seal housing bore, shaft finish, and runout.
Table of dimensional data for various X-200 seal sizes in inches.
Ensuring shaft/sleeve condition, housing cleanliness, and gland bolting.
Lubricating, sliding the cartridge, and installing the pump backplate.
Positioning the gland, tightening nuts, and final pump assembly.
Piping a product bypass flush from pump discharge to the seal flush port.
Identifying buffer/barrier fluid inlet and outlet ports based on rotation.
Piping for pressurized and unpressurized dual seal modes with supply tank.
Recommendations to avoid exceeding corrosion, P-V, and temperature limits.
Ensuring buffer/barrier fluid is present in the seal cavity during operation.
Guidelines for returning seals for repair, including decontamination.
General| Brand | Flowserve |
|---|---|
| Model | Durametallic X-200 |
| Category | Racks & Stands |
| Language | English |
To Next Page
