To Next PageTo Next PageWhy is my Fluance RT81 Turntable playing at the wrong speed?
If your Fluance Turntable is playing at the wrong speed, first check the record label to confirm the correct playback speed and ensure the speed selection knob is set accordingly. Normal LP playback speed is 33 1/3 rpm. Also, ensure that the turntable has completed the 24-hour burn-in process.
How to fix Fluance RT81 Turntable not spinning?
To address a Fluance Turntable that is not spinning, ensure it's connected to a working power outlet with the power cable securely in place. Also, remove the turntable mat and check that the rubber belt is properly connected around the motor pulley. Finally, verify that the speed selection knob is set to 33 or 45, which should activate the power LED and start the platter when the tonearm is lifted.
General| Speeds | 33 1/3 RPM, 45 RPM |
|---|---|
| Platter | Aluminum |
| Cartridge | Audio-Technica AT95E |
| Output | RCA |
| Weight | 14.1 lbs |
| Motor | DC Motor |
| Dust Cover | Yes |
| Type | Belt Drive |
| Tonearm | S-Type |
| Preamp | Built-in |
| Stylus | Elliptical |
| Wow and Flutter | <0.2% |
