Need help?Do you have a question about the Fluid Imaging Technologies FlowCam 8400 and is the answer not in the manual?
General| Model | FlowCam 8400 |
|---|---|
| Light Source | LED |
| Software | VisualSpreadsheet |
| Weight | Approx. 15 kg |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Imaging Technology | Digital Imaging |
| Magnification | 10x |
| Flow Cell Width | 1.0 mm |
| Data Output | Images |
Precautions for safe operation involving the analyzer's laser.
Warnings regarding electrical shock and unexpected mechanical movement.
Measures to prevent serious injury, equipment damage, and electrical hazards.
Guidelines for safe handling, lifting, and installation of the instrument.
Step-by-step guide for connecting all necessary peripherals to the analyzer.
Procedure for safely powering on the FlowCam analyzer.
Precautions and steps for handling and preparing the flow cell.
Guide to connecting the upper and lower tubing to the flow cell.
Detailed steps for physically installing the flow cell into the analyzer.
Step-by-step guide for installing and selecting an objective lens.
Steps for running the Autofocus Assistant and loading sample.
Procedure for introducing sample and initiating the analysis run.
Steps for flushing the analyzer system after use.
Procedure for performing manual cleaning and rinsing of the analyzer.
Configuring automated clean and rinse cycles at the end of analysis.
Instructions for properly shutting down and powering off the analyzer.
Detailed guidelines for cleaning and maintaining the flow cell.
Step-by-step instructions for replacing the pump syringe.
Details on what the standard factory warranty covers and its limitations.
Contact details for customer support and assistance.
To Next Page
