How to fix no water coming from my Fluid Toilet nozzle?
If your Fluid Toilet isn't dispensing water from the nozzle, first, check if the water inlet hose is bent, causing a blockage; if so, straighten it. Next, make sure the inlet valve is turned on. Finally, verify that your water supply hasn't been cut off; if it has, reconnect it and wait for the water to return.
How to fix low wind temperature on Fluid Toilet?
If the wind temperature from your Fluid Toilet feels low, the wind temperature setting might be at the normal temperature level. Try resetting the wind temperature to your desired level.
Why deodorization function keeps working on Fluid Toilet after user leaves?
If you notice that the deodorization function of your Fluid Toilet continues to run even after you leave the seat, this is normal. The deodorization function is designed to continue working to ensure all odors are completely eliminated.
How to increase the seat temperature on my Fluid Toilet?
If you're experiencing low seat temperature on your Fluid Toilet, it's possible the seat temperature is set to the normal temperature level. Try resetting the seat temperature. Also, if the toilet is in standby mode, switch it to operating mode and wait 3 minutes.
Why is my Fluid Toilet remote control not displaying anything?
If the remote control for your Fluid Toilet isn't displaying anything, the battery might be installed incorrectly. Try reloading the battery in the correct direction.
How to fix no wind coming out of my Fluid Toilet?
If your Fluid Toilet isn't blowing any air, it might be in standby mode or power-saving mode. To use the drying function, switch the toilet to operating mode.
Why Fluid Toilet nozzle rod cannot stretch out?
If the nozzle rod of your Fluid Toilet isn't stretching out, first, ensure that the power is on. If the power is on, make sure you are properly seated in the sensing area.
What to do if Fluid Toilet nozzle rod cannot retract?
If the nozzle rod of your Fluid Toilet won't retract, and the power is off, gently push the nozzle rod back in and then turn the power on. If the power is on, check the nozzle for any obstructions or impurities and carefully clear them away.
Why is the water cleaning weak on my Fluid Toilet?
If the water cleaning function of your Fluid Toilet seems weak, start by checking the water inlet hose for any bends that might be causing a partial blockage; straighten the hose if necessary. Also, ensure that the water inlet valve is fully open. Lastly, inspect the inlet filter for any blockages and clean it if needed.
The Fluid Bidet Seat (model BID1000W) is an electric bidet seat designed to enhance personal hygiene and comfort. It offers a range of features including various cleaning modes, a drying function, a heated seat, and deodorization. The product is intended for use with a standard toilet and requires a grounded electrical outlet and a water supply connection.
The bidet seat provides both rear and front cleaning functions. Users can initiate these functions by turning a knob on the main unit. The rear cleaning knob, when turned forward, starts the rear cleaning function, followed by automatic drying. Turning the knob further adjusts the washing position. Similarly, the front cleaning knob, when turned backward, initiates front cleaning and subsequent automatic drying, with knob adjustments controlling the washing position. A vertical press of the knob acts as a stop button, halting any active function (rear cleaning, front cleaning, drying, or nozzle cleaning).
The device includes a drying function with adjustable warm wind temperature and speed. For comfort, the seat is heated, offering 6-level temperature adjustment. A "soft close" mechanism prevents the lid and seat from slamming. To prevent low-temperature burns, the seat temperature automatically drops to a low level after 10 minutes of continuous use.
Deodorization is achieved without photocatalyst and offers 6-level adjustment. The product also features a night light assembly with "Smart," "Always on," and "Always off" settings. A noise-free setting ensures quiet operation at night by turning off the buzzer. A user ID setting helps avoid interference from remote controls in multi-user environments.
Safety features are integrated throughout the design. These include a water temperature sensor, anti-burning apparatus, thermostat, temperature fuse, ground fault protection, leakage protection, and an anti-freeze cracking device. For water pressure, it has a pressure stabilizer and an automatic pressure discharging device. Anti-fouling measures include an anti-syphon device, anti-backflow device, and a filter device.
To Next Page
General