EasyManua.ls Logo

Fluid Horizon V2 - SAFETY CHECKLIST; Pre-Ride Inspection Checklist; Riding Environment Readiness; Mandatory Protective Gear

Fluid Horizon V2
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
SAFETY CHECKLIST
General
Your scooter should feel stable without much play or wobble.
If something does not feel or look right, please contact fluidfreeride.
Riding Environment
There must be sufficient light so you can see the road ahead of you. If
not, use an additional headlight!
If you must ride in the rain, ride slowly and with caution.
Wheels
Check the main lateral wheel nuts for firmness regularly and after your
first 50 miles of riding. Re-tighten if necessary.
Throttle
Before riding, check if the throttle sits firmly on the handlebar and is
returning to its original position when released.
Brakes
Check the rear drum brake for proper tension and effectiveness
regularly and prior to using the scooter for the first time.
Folding mechanism
Check that the folding mechanism is locked into place with an audible
click. See further below under FOLDING AND UNFOLDING.
CAUTION
Wear protective gear like helmet, gloves,
knee, and elbow pads at all times during use

Related product manuals