1760
Getting Started Manual
2
Table 1. Symbols
Symbol Description
W Important information. See manual
X Hazardous voltage
P Conforms to requirements of European Union
Identifications
Figure 1 identifies different measurement categories
(CAT).
emv01.wmf
Figure 1. CAT Identifications
Qualified Personnel
Adequate qualifications are the following:
• Training and authorization to switch on/off, earth
ground, and mark power distribution circuits and
devices in accordance with the safety standards
of electrical engineering
• Training or instruction in accordance with the
standards of the safety engineering in the
maintenance and use of appropriate safety
equipment
• Training in first aid
Safe Operation
For safe operation of the instrument:
• Ensure that all persons using the device have
read and fully understood the operating manual
and safety instructions
• The device may only be used under certain
ambient conditions. Ensure that actual conditions
conform to the admissible conditions outlined in
the "Technical Data" chapter of the Users Manual