1
1760 Power Quality Recorder
Introduction
This Getting Started Manual for the Fluke 1760 Power
Quality Recorder, referred to throughout simply as “the
Recorder”, will allow you to set up and begin various
power quality measurements. The guide is an
abbreviated version of the User Manual and other
materials included on the CD-ROM shipped with the
Recorder.
Safety Information
Please read this section carefully for important safety
information when using the Recorder. In this manual a
Warning identifies conditions and actions that pose
hazard(s) to the user. A Caution identifies conditions and
actions that may damage the Recorder.
General Safety Instructions
The design and manufacture of this device conform to the
latest state of technology and the safety standards laid
down in IEC 61010-1 2
nd
edition. If used improperly, there
is a risk of injury to persons and damage of the property.
Protection Class
The device is assigned to Protection Class I according to
IEC 61140 and is equipped with a protective earth ground
connector.
Symbols
Table 1 describes Warning and Caution symbols used in
this manual and/or the Recorder.
To Next Page
Loading...
Need help?
General