Clamp Meter
Safety Information
5
• Connect the common test lead before the live test lead and remove the
live test lead before the common test lead.
• Remove all probes, test leads, and accessories before the battery door
is opened.
• Do not use the Product if it is damaged.
• Disable the Product if it is damaged.
• Do not use the Product if it operates incorrectly.
• Do not use test leads if they are damaged. Examine the test leads for
damaged insulation, exposed metal. Check test lead continuity.
• Before each use, examine the Product. Look for cracks or missing
pieces of the clamp housing. Also look for loose or weakened
components. Carefully examine the insulation around the jaws. See
Clamp Meter, item .
• Examine the case before you use the Product. Look for cracks or
missing plastic. Carefully look at the insulation around the terminals.
• Read all safety Information before you use the Product.
To Next Page
Loading...
