Fluke 419D User Manual

2 Sec. =
+=
On/Of
f
+=
On/Off
1x = Set back or clear value
2x = Clear all
+
2 Sec. = Off
2 Sec. = Delete History
1x
2x
Default
Auto-detect
1
2
9
8
7
3
4
5
6
1
2
1x =
. . .
+
=
2 Sec. = Delete History
Recall
Use the value shown
in the Summary line
for further calcuations.
1 20
2 sec.
PN 4117715 June 2012, Rev. 1, 7/16
© 2012-2016 Fluke Corporation. All rights reserved.
Laser Distance Meter
419D
Quick
Reference
Guide
Buttons
1. Measure/Min Max/Power On
2. Plus (+)/Scroll Up
3. Minus (-)/Scroll Down
4. Area/Volume
5. Memory
6. Clear/Off
7. Reference/Units
8. Timer
9. Indirect Measurement
(Pythagoras)/Stake Out
W
WARNING
The Meter produces a visible laser
beam which emerges from the
front of the Meter.
0.000 m 0.00 ft
0.000
0
m 0′00″
1/32 *
0.00 m 0.000 in
0 in
1/32
* default

Fluke 419D Specifications

General

Battery type	AAA
Auto power off	Yes
Battery voltage	1.5 V
Auto power off after	3 min
Battery life (measurements)	5000
Number of batteries supported	2
Type	Laser distance meter
Display type	Digital
Certification	IEC Standard No. 61010-1:2001 EN60825-1:2007 (Class II) EN 55022:2010 EN 61000-4-3:2010 EN 61000-4-8:2010
Product color	Grey, Yellow
Display technology	LCD
Pythagoras functions	1+2
Display number of lines	3 lines
Distance measuring units	ft, m
Number of memory records	5
International Protection (IP) code	IP54
Accuracy	1 mm
Wavelength	635 nm
Laser beam diameter (max)	60 mm
Laser beam diameter (min)	6 mm
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	-10 - 50 °C
Maximum measurement distance	80 m
Operating relative humidity (H-H)	0 - 85 %

Weight and Dimensions

Depth	33 mm
Width	56 mm
Height	127 mm
Weight	153 g

Summary

Memory Operations

Recall Last Stored Measurement

Recalls the most recently saved measurement from memory.

Use Summary Line for Calculations

Utilizes the value displayed in the summary line for subsequent operations.

Delete Measurement History

Clears all previously stored measurement data from the device.

Data Clearing and Power Off

Clear Current Value

Resets or clears the currently displayed measurement or setting.

Clear All Data and Settings

Erases all recorded measurements and resets device configurations.

Power Off Device

Turns the laser distance meter off.

Device Controls and Functions

Measure and Power On/Off Button

Initiates measurement or turns the device on and off.

Navigation and Adjustment Buttons

Used for scrolling through menus and adjusting values.

Mode and Feature Buttons

Accesses Area, Volume, Memory, Units, Timer, and Indirect Measurement functions.

Safety Warning

Laser Beam Hazard

Warning about the visible laser beam emitted from the front of the meter.