Fluke 433 - Page 25

3-1
Chapter 3
Performance Verification
Title Page
3.1 Introduction.................................................................................................. 3-3
3.2 Equipment Required For Verification ......................................................... 3-4
3.3 General Instructions..................................................................................... 3-4
3.4 Operating Instructions.................................................................................. 3-4
Resetting the Analyzer .................................................................................. 3-4
3.5 Display And Backlight Test......................................................................... 3-4
3.6. Verification of Current Inputs..................................................................... 3-6
3.6.1 Preparation............................................................................................ 3-6
3.6.2 Accuracy............................................................................................... 3-6
3.6.2 Bandwidth check of current channels (*) ............................................. 3-7
3.7 Voltage Inputs.............................................................................................. 3-7
3.7.1 Introduction .......................................................................................... 3-7
3.7.2 Verification of voltage inputs in 120 V range ...................................... 3-9
3.7.3 Verification of voltage inputs in 230 V range ...................................... 3-10
3.7.4 Verification of voltage inputs in 400 V range ...................................... 3-12
3.7.5 Verification of voltage inputs in 6 kV range (Transients) .................... 3-14
3.8 Channel Isolation (*) ................................................................................... 3-16