Need help?Do you have a question about the Fluke CableAnalyzer DSP-4300 and is the answer not in the manual?
General| Model | DSP-4300 |
|---|---|
| Type | Cable Analyzer |
| Manufacturer | Fluke Networks |
| Category | Measuring Instruments |
| Frequency Range | 1 MHz to 350 MHz |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Supported Cable Types | STP, UTP |
| Test Parameters | Wire Map, Length, Propagation Delay, Delay Skew, Insertion Loss, Return Loss, NEXT, PSNEXT, ACR, PSACR, ELFEXT, PSELFEXT, Attenuation to Crosstalk Ratio |
| Measurements | Length, Attenuation, NEXT, Return Loss, ACR, ELFEXT, Delay, Wiremap |
| Display | LCD |
| Interface | Serial port |
| Battery Type | NiMH battery pack |
| Battery Life | Up to 10 hours |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Test Standards | TIA Cat 5, Cat 5e, Cat 6, ISO Class C, Class D, Class E |
To Next Page