Need help?Do you have a question about the Fluke 789 and is the answer not in the manual?
General| Type | ProcessMeter |
|---|---|
| DC Voltage Range | 0 to 1000 V |
| AC Voltage Range | 0 to 1000 V |
| Loop Current | 0 to 24 mA |
| Resistance Range | 0 to 4000 Ω |
| Display | LCD |
| Safety Rating | CAT III 1000 V, CAT IV 600 V |
| Operating Temperature | -20 °C to 55 °C |
| Storage Temperature | -40 °C to 60 °C |
| Continuity | Yes |
| Diode Test | Yes |
| Loop Power | 24 V |
| Pressure Range | Not applicable |
| Power Source | 4 AA batteries |
| Dimensions | 203 x 100 x 50 mm |
| Weight | 0.6 kg |
| Temperature Range | Not applicable |
Specifies the input impedance for voltage measurement functions, typically 10 MΩ.
Explains how measurement ranges affect resolution and accuracy, and how auto-ranging works.
Details the procedure for testing a single diode using the meter's functions.
Details the accuracy, resolution, and input impedance for DC voltage measurements.
Details the accuracy and resolution for DC millivolt measurements.
Details accuracy, resolution, and AC conversion for AC voltage measurements.
Details accuracy, resolution, and burden voltage for AC current measurements.
Details accuracy, resolution, and burden voltage for DC current measurements.
Details accuracy, resolution, and measurement current for resistance measurements.
Provides accuracy specifications for the frequency counter function.
Specifies the minimum sensitivity required for frequency counter measurements.
Details the specifications for diode test and continuity test functions.
Specifies the voltage and protection details for the loop power supply.
Details span, accuracy, and compliance voltage for DC current output modes.
Covers general operating conditions, environmental limits, size, weight, and safety ratings.
Information on EMC compliance and standards relevant to the meter's operation.
To Next Page
