To Next PageTo Next Page
Need help?Do you have a question about the Fluke ProcessMeter 787B and is the answer not in the manual?
General| Battery life | 140 h |
|---|---|
| Battery size | AA |
| Battery technology | Alkaline |
| Number of batteries supported | 4 |
| Manual | Yes |
| Loop voltage | 1000 V |
| Drop proof up to | 1 m |
| Operating vibration | 2 G |
| Storage temperature (T-T) | -40 - 60 °C |
| Operating temperature (T-T) | -20 - 55 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
Weight and Dimensions| Depth | 50 mm |
|---|---|
| Width | 100 mm |
| Height | 203 mm |
| Weight | 600 g |
Specifies the input impedance for voltage measurement functions.
Explains how measurement ranges affect resolution and value.
Step-by-step guide for testing diodes with the meter.
How to use MIN MAX AVG recording to track readings.
Functionality for freezing the meter's display on stable readings.
Method to zero out test lead resistance for accurate ohm measurements.
How to use the meter to supply current into a passive circuit.
How to use the meter to simulate a current loop transmitter.
Steps to generate a stable mA DC output for testing.
How to adjust current output in 25% increments.
Using auto ramp features for continuous current stimulus.
Guidelines for annual calibration to ensure accuracy.
Step-by-step instructions for replacing the meter's batteries.
Detailed specifications for DC voltage measurements.
Specifications for measuring DC millivolts.
Specifications for AC voltage measurements.
Specifications for AC current measurements.
Specifications for DC current measurements.
Specifications for resistance (ohms) measurements.
Accuracy specifications for the frequency counter function.
Sensitivity specifications for the frequency counter.
Specifications for diode testing and continuity checks.
Specifications related to loop power supply mode.
Specifications for DC current output (source/simulate).
General operating conditions, size, weight, and safety standards.
EMC compliance information for various regions.
