Fluke DTX-1800 User Manual

DTX-MFM2/GFM2/SFM2
Fiber Modules
Users Manual
PN 2142235
April 2004, Rev. 2 3/06
© 2004, 2006 Fluke Corporation. All rights reserved. Printed in USA.
All product names are trademarks of their respective companies.
Fluke Networks DTX-1800 DTX-GFM2 Specs
Provided by www.AAATesters.com

Fluke DTX-1800 Specifications

General

Frequency Range	1 MHz to 900 MHz
Humidity	10% to 90% non-condensing
Test Cable Types	Twisted pair, coaxial
Display	Color LCD
Memory	Internal storage for test results
Interface	USB
Battery	Lithium Ion
Battery Life	12 hours
Operating Temperature	0 °C to 45 °C (32 °F to 113 °F)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)

Summary

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Overview of Features

Unpacking

Safety Information

Getting Acquainted

Installing and Removing Fiber Modules

Step-by-step guide for installing and removing the fiber modules.

Installing the Connector Adapter

Essentials for Reliable Fiber Test Results

Cleaning Connectors and Adapters

Procedures for cleaning fiber connectors and adapters to ensure measurement accuracy.

About Setting the Reference

Selecting Reference Test Cords

Testing Your Reference Test Cords

Using Mandrels for Testing Multimode Fiber

Fiber Test Settings

Fiber Type

Procedure for selecting the appropriate fiber type for the test.

Test Limit

Remote End Setup

Test Method > Method A, B, C

Set Reference

Procedure for establishing a baseline power level for loss measurements.

About Method B Connections

Certifying Fiber Cabling

Autotest in Smart Remote Mode

Autotest in Loopback Mode

Using the Visual Fault Locator

Monitoring Optical Power

Maintenance