Need help?Do you have a question about the Fluke DTX-1200 and is the answer not in the manual?
General| Model | DTX-1200 |
|---|---|
| Type | Cable Analyzer |
| Brand | Fluke Networks |
| Display | Color LCD |
| Test Capabilities | Copper and Fiber Optic Testing |
| Testing Standards | TIA, ISO |
| Test Standards | ISO/IEC 11801 |
| Standards Compliance | TIA, ISO, IEEE |
| Cable Types | Twisted pair, coaxial, fiber optic |
| Battery Life | 12 hours |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | -20 to 60 °C |
| Humidity | 0 to 90% non-condensing |
Details the procedure and frequency for setting the tester's reference.
Instructions for performing an autotest on twisted pair cabling.
Explains how to interpret the summary screen showing test results and pass/fail status.
Provides diagnostic information and suggestions for troubleshooting failed tests.
Explains the meaning of asterisk (*) notation in test results, indicating marginal performance.
Information on required calibration frequency and procedure.
Steps to update the tester's software using a PC connection.
To Next Page
