Maintenance
41
Maintenance
W
X
Warning
To avoid possible fire, electric shock, personal
injury, or damage to the tester:
• Do not open the case. No user-serviceable parts
are inside.
• Replacing electrical parts yourself will void the
tester's warranty and might compromise its
safety features.
• Use only specified replacement parts for user-
replaceable items.
• Use only Fluke Networks authorized service
centers.
Caution
Replacing electrical parts yourself might void
the tester's calibration and compromise its
accuracy. If the calibration is void, cable
manufacturers might not extend their warranty
to the cabling you install.
Cleaning
Clean the display with glass cleaner and a soft, lint-free
cloth. Clean the case with a soft cloth dampened with
water or water and a mild soap.
Caution
To avoid damaging the display or the case, do
not use solvents or abrasive cleansers.
Factory Calibration
The tester requires calibration at a service center once a
year to ensure that it meets or exceeds the published
accuracy specifications. Contact an authorized Fluke
Networks Service Center for information on getting your
tester calibrated.
To Next Page
Loading...
