Fluke DTX-1200 - Uploading Results to a PC

Memory Functions
35
Uploading Results to a PC
To upload results to a PC, do the following:
1 Install the latest version of LinkWare software on
your PC.
2 Turn on the tester.
3 Connect the tester to the PC with the USB cable
included or the DTX serial cable available from Fluke
Networks.
or
Insert the memory card containing results into the
PC’s memory card reader.
4 Start LinkWare software on the PC.
5 Click Import
on the LinkWare toolbar. Select the
tester’s model from the list.
or
Select Memory card or folder on PC.
6 Select the records you want to import; then click OK.